Before you go, check this out!
We have lots more on the site to show you. You've only seen one page. Check out this post which is one of the most popular of all time.
Category: Sonoff
Many electric geysers using an element draw in excess of 16 Amps (+-4,000W on a 240V circuit) so using a something like a Sonoff Basic R2 (only rated to a maximum of 10A or 2,200W) would almost...
Why does my ET gate motor stop before fully closing or opening?
If you ET 500 Residential Sliding Gate Motor is not fully opening or closing then it is either due to a dead 12V battery or due to some sort of obstacle triggering the gates motors obstacle...
How to Connect Surveillance Camera Line Cross Sensors to Home Assistant
You have IP surveillance cameras and a Home Assistant setup and you are wondering if you can integrate the two. I was in exactly the same boat a couple of months ago and was pleasantly surprised to...
Yes, Sonoff devices can work without an active internet connection. Since mid 2018, Itead (the manufacturer of Sonoff devices) have been shipped Sonoff devices with firmware that includes a feature...
In the past, if you wanted to get your Sonoff devices working with Home Assistant, then you would have no choice but to flash them with custom firmware such Tasmota. However, with the development of...
Smart switch are a nice to have when they work in isolation (e.g. switch lights on from the comfort of your sofa) but they really become useful when they are setup as part of an automation (e.g. ...